The tutorial for Binder Buddy is finished and published to my YouTube channel!!! This is a scary but exciting journey, and I hope you all love it! This is a very beginner friendly pattern, however, it is made with vinyl or cork because the edges are exposed. Don’t be afraid, my testers all used a domestic machine!!!
These adorable little car trash bags are the biggest seller in my shop! I mean, who doesn’t need a beautiful bag to fill with trash! LOL They are lined with vinyl for quick wipe downs, but if they get too gross you can throw them in the washing machine on cold and hang to dry!!! Moms really love these! I have even been told that in a pickle, they can contain vomit from a carsick kid! But please try to avoid that if at all possible.
This is my own pattern, I spent hours and lots of trial and error to get the size that I liked. I am happy to share this pattern with you and don’t even mind if you sell what you have made, but I do ask that you give me credit whenever possible. Link back to this blog when it is allowed, ask people to follow here and if you want to share the pattern with friends…please don’t just give them the pattern, have them come here to check out my blog. I am always happy to share and will likely share more of my patterns soon, but I am just starting here and would appreciate the followers.
Now, let’s sew!
10″ x 11″-2 pcs (front and back) plus interfacing for both
4″x 17″- 1 pc for strap plus interfacing
4″x 2.5″- 1 pc for d ring tab-no interfacing
20″ x 11″- 1 pc lining fabric
20″x 11″- vinyl fuse
1″ swivel clip and d ring
marking pen or chalk
1/4″ Seam allowance
Cut all of your fabric, interfacing and vinyl fuse
Fuse your interfacing to each outside piece and the vinyl fuse to the lining piece, according to product instructions.
To make the d ring tab, start by folding it in half and making a crease. Open it back up and press both sides into the center crease. Then fold the entire thing in half. Topstitch, add your d ring and set aside.
For the strap, we start by folding one end over about 1/2″. After you do that, just follow the steps from the d ring tab!
Topstitch and attach your swivel hook…make sure you backstitch a couple times when you are sewing in the hook.
Lay your front and back pieces right sides together and clip in place.
Now you will take your lining piece and fold it in half right sides together, put a couple clips on the fold side to hold it from shifting.
You want to trim the outside and inside pieces so they are the exact same size, otherwise they will not go together and you will end up with puckers. Keep in mind that your outside will be 1/4″ bigger because it will have the seam allowance on the left side and the lining is folded. I like to lay the outside piece on top of the lining, but pull it over to the left 1/4″, then trim the right side so that they match up. I hope this makes sense…it’s easier to do than to explain!
Sew with 1/4″ seam allowance around 3 sides of the outside pieces and just the right side and bottom of the lining.
For the boxed corners, you are going to reach inside and push the corners out to make a triangle. Do this for all 4 corners. Tip: When you are doing the lining piece on the fold side, I like to draw a line right on the fold and snip up to the stitches (that is now your make believe seam)
Take your ruler and mark a 4″ line. Tip: a square quilting ruler makes life so much easier!!! Just place the 2″ line right on top of your seam. Then you will stitch over the line you just marked (remember to backstitch). Trim corners to 1/4″.
You will turn your outside piece so that it is right side out, but leave your lining piece inside out.
This is the part where I remove the accessory tray from my machine so that I can slide the bag around the arm of my machine and sew in a circle!
Fold your outside piece in half to find the center of the back and mark. Measure 1.5″ to each side of your center mark. Place your strap to one side and the d ring tab to the other, so that there is 3″ between them. Baste in place.
Place your outside piece inside of your lining piece, so that they are right sides together. Leaving an opening at the front, stitch around the top with 1/4″ seam allowance…make sure to backstitch at the start and stop or you will be mad at yourself!
Now it’s time to birth this cutie!!! Carefully reach inside the trash bag and pull it through. Tuck the lining down inside the outside. Close your opening and topstitch all the way around.